AUTO SPORTS CAR CARE

Vehicle Services

Vehicle Services

Professional PPF, ceramic coating, window tinting, detailing, paint and body work by AUTO SPORTS CAR CARE, Sharjah. Every job starts with an inspection of your vehicle and a clear scope before work begins.

Vehicle Care & Reconditioning

Precision Vehicle Detailing & Structured Wash Care

A condition-led exterior and interior care procedure designed around the surfaces, contamination level and areas included within the authorised service scope.

  1. 1. Preliminary Condition AssessmentExamine accessible exterior and cabin surfaces, identify sensitive materials and establish the approved treatment boundaries before commencement.
  2. 2. Pre-Cleaning & DecontaminationRemove loose contamination and carry out the appropriate wash sequence across the authorised exterior areas, wheels and related surfaces.
  3. 3. Targeted Detailing & Controlled DryingPerform focused cleaning according to surface type, followed by controlled drying and interior treatment where included within the selected service.
  4. 4. Quality-Control VerificationReview completed areas, address practical omissions and communicate any condition-related limitations identified during the procedure.

Exterior Surface & Cabin Reconditioning

A coordinated reconditioning programme separating exterior and interior materials by substrate type so each area can receive an appropriate preparation and treatment methodology.

  1. 1. Material & Condition AssessmentEvaluate paintwork, trim, glazing, wheels, upholstery and cabin materials while identifying areas requiring specialised attention.
  2. 2. Exterior Surface PreparationClean and prepare the authorised exterior surfaces before proceeding with detailed treatment of paintwork, trim, glazing and wheel areas.
  3. 3. Cabin ReconditioningRemove loose debris and treat approved interior surfaces using a procedure selected according to the material and existing condition.
  4. 4. Final-Condition InspectionVerify the completed exterior and cabin presentation and identify permanent staining, wear or damage beyond the corrective capability of cleaning alone.

Intensive Interior Reconditioning

A deeper cabin-treatment procedure selected according to upholstery construction, surface condition, contamination level and the interior areas authorised for treatment.

  1. 1. Interior Material AssessmentInspect seating, carpeting, trim panels and other cabin surfaces before determining the appropriate treatment methodology.
  2. 2. Dry Extraction PreparationVacuum and remove loose particulate contamination so subsequent treatment can concentrate on embedded or affected areas.
  3. 3. Targeted Deep-Cleaning TreatmentTreat approved fabrics, carpets, plastics and compatible interior materials according to their construction and existing condition.
  4. 4. Drying & Condition VerificationAllow treated materials to stabilise as required, then inspect the cabin and document visible limitations such as permanent staining, ageing or wear.
Paintwork Correction & Refinement

Machine Polishing & Corrective Paint Refinement

A paintwork-correction methodology established after assessing visible defects, previous repair history and the condition of the existing finish. Correction intensity is selected conservatively according to the surface presented.

  1. 1. Paintwork Condition AssessmentEvaluate visible defects, previous refinishing and general surface condition before defining the appropriate correction sequence.
  2. 2. Decontamination & Edge ProtectionPrepare the paint surface through cleaning and decontamination while protecting sensitive trim, edges and adjoining materials where required.
  3. 3. Test Section & Corrective RefinementEstablish a suitable correction approach on a controlled test area and undertake the approved polishing stages without assuming every defect can be safely eliminated.
  4. 4. Finish Refinement & Illumination InspectionRemove polishing residue, evaluate the finish under suitable lighting and complete the authorised final-refinement stage.
Optical Surface Restoration

Headlamp Lens Restoration & Clarity Refinement

A restoration process directed at correctable exterior lens deterioration after distinguishing external oxidation or surface damage from deterioration located within the lamp assembly.

  1. 1. Optical Lens AssessmentInspect haze, oxidation, surface degradation and indications of internal deterioration before treatment is authorised.
  2. 2. Cleaning & Surrounding-Surface ProtectionPrepare the lens and protect adjacent paintwork and trim before controlled surface refinement begins.
  3. 3. Progressive Surface RefinementCorrect the exterior lens surface through the required staged refinement and polishing procedure.
  4. 4. Clarity & Condition VerificationEvaluate the restored exterior surface while identifying any remaining internal deterioration or severe ageing that cannot be corrected externally.
Wheel Care & Refinishing

Wheel Decontamination & Cosmetic Reconditioning

Wheel treatment begins with an assessment of the existing finish, contamination and visible cosmetic condition before cleaning or any separately authorised restoration procedure.

  1. 1. Wheel-Finish AssessmentInspect the visible coating, contamination and cosmetic damage before selecting an appropriate treatment sequence.
  2. 2. Surface Cleaning & DecontaminationClean accessible wheel surfaces and remove compatible contamination according to the condition of the existing finish.
  3. 3. Authorised Cosmetic RestorationUndertake repair or refinishing only where separately assessed and included within the approved project scope.
  4. 4. Finish VerificationReview the cleaned or restored wheel finish and complete a final-condition inspection before handover.
Vehicle Protection & Film Systems

Paint Protection Film Application

Protective-film installation is configured around existing paint condition, selected coverage, panel geometry and the areas formally authorised for application.

  1. 1. Paintwork & Coverage AssessmentEvaluate visible paint condition and confirm the panels, coverage boundaries and installation scope before preparation begins.
  2. 2. Panel Decontamination & PreparationClean, decontaminate and prepare installation surfaces; component removal is undertaken only where necessary and authorised.
  3. 3. Controlled Film Alignment & ApplicationPosition and apply the film across the selected panels while managing alignment, contour conformity and edge finishing according to panel geometry.
  4. 4. Edge-Conformity Inspection & AftercareVerify visible alignment and edge condition, allow the installation to stabilise and provide relevant initial aftercare guidance.

Colour Paint-Protection Film Transformation

Colour protective-film installation combines paint-surface protection with an aesthetic colour transformation and therefore requires surface-condition, colour and coverage approval before application.

  1. 1. Surface Assessment & Colour ApprovalEvaluate the vehicle finish, confirm the selected film colour and establish the panels included within the authorised transformation.
  2. 2. Substrate PreparationClean and decontaminate the relevant panels to provide an appropriately prepared surface for installation.
  3. 3. Panel-by-Panel Film InstallationApply the selected colour film progressively while controlling alignment, contour formation and edge finishing around the approved disassembly scope.
  4. 4. Colour Continuity & Edge VerificationReview panel-to-panel presentation, installation edges and overall finish before vehicle handover.

Vehicle Surface Wrapping & Aesthetic Transformation

Vehicle wrapping is undertaken after assessing paint condition, confirming the selected material and defining the authorised coverage, access and component-removal requirements.

  1. 1. Paintwork & Project-Scope AssessmentReview the existing surface, selected wrap material and the panels included within the transformation.
  2. 2. Surface Preparation & Access PlanningPrepare the relevant surfaces thoroughly and remove components only where required and authorised for installation access and edge finishing.
  3. 3. Controlled Panel ApplicationPosition, form and finish the wrap across approved panels while managing joins, contours and transition areas.
  4. 4. Adhesion & Edge-Conformity VerificationInspect visible edge adhesion, panel transitions and overall presentation before final handover.
Automotive Glazing & Thermal-Control Films

Nano-Ceramic Automotive Window-Film Application

Automotive window-film installation begins with glazing and existing-film assessment, followed by controlled glass preparation, film sizing and application.

  1. 1. Glazing & Existing-Film AssessmentInspect visible glass condition and determine whether existing film removal or additional preparation is required.
  2. 2. Interior Protection & Glass PreparationProtect adjacent cabin areas and prepare the glazing to minimise contamination during installation.
  3. 3. Precision Sizing & Film ApplicationPrepare the film for the selected glazing, position it accurately and complete the controlled installation procedure.
  4. 4. Edge, Visibility & Curing ReviewVerify visible edge condition and presentation, then provide guidance relating to the initial stabilisation period.

Clear Windscreen Thermal-Control Film

Clear windscreen film is applied following an assessment of glazing condition and confirmation of the authorised film system and installation scope.

  1. 1. Windscreen Condition AssessmentInspect the glazing, existing film and visible damage before preparation is undertaken.
  2. 2. Controlled Glass PreparationPrepare the installation surface carefully while protecting adjacent dashboard and cabin materials.
  3. 3. Film Forming & ApplicationPrepare the selected film to the windscreen geometry, position it and complete the installation process.
  4. 4. Visibility & Edge-Conformity ReviewInspect the completed application and provide appropriate guidance for the initial stabilisation period.
Surface Protection Systems

Ceramic Surface Protection Application

Ceramic coating preparation is determined by existing paint condition. Corrective polishing is undertaken only where separately selected and authorised within the project scope.

  1. 1. Paintwork Condition AssessmentEvaluate contamination, visible defects and previous surface work before defining the preparation requirement.
  2. 2. Cleaning, Decontamination & PreparationPrepare the paint surface appropriately; corrective refinement is performed only where included within the authorised scope.
  3. 3. Surface Preparation & Coating ApplicationComplete the final surface-preparation stage and apply the selected coating according to the applicable product procedure.
  4. 4. Initial Curing & Application VerificationAllow the coating to stabilise as required, inspect the application and provide relevant early-stage aftercare guidance.
Film Removal & Surface Recovery

PPF, Vehicle Wrap & Window-Film Deinstallation

Existing protective or decorative film is assessed before removal because material age, adhesive condition, prior refinishing and the substrate underneath can influence the deinstallation process.

  1. 1. Film & Substrate AssessmentEvaluate film age, visible lifting, adhesive condition and known previous surface repairs before removal begins.
  2. 2. Controlled Film DeinstallationRemove the existing material progressively using a method selected for its type and observed condition.
  3. 3. Adhesive-Residue RemediationAddress compatible adhesive residue and clean the newly exposed surface as required.
  4. 4. Exposed-Substrate InspectionReview the underlying paintwork, glass or trim after removal, noting that pre-existing deterioration may become visible only once the film is removed.
Automotive Refinishing & Restoration

Automotive Paint Refinishing

Refinishing methodology is established from panel condition, previous repair history and the authorised repair requirement before preparation, coating application and final finishing.

  1. 1. Panel & Repair-Scope AssessmentInspect the affected panels, visible previous repairs and preparation requirements before refinishing work commences.
  2. 2. Repair Preparation, Sanding & MaskingComplete authorised surface repair, abrasive preparation and masking before the refinishing stages are undertaken.
  3. 3. Primer, Colour & Clear-Coat ApplicationApply the required refinishing stages as applicable to the approved paint system and individual repair scope.
  4. 4. Drying, Finish Refinement & InspectionComplete required drying and finishing procedures, inspect the repaired panels and reinstall removed components where applicable.
Automotive Body Repair & Restoration

Bodywork, Corrosion Remediation & Restoration

Body repair is scoped following inspection. The applicable methodology depends on damage type, corrosion condition, panel construction, access requirements and the components involved.

  1. 1. Damage & Structural-Surface AssessmentReview visible dents, corrosion, panel condition, alignment and areas requiring access or controlled disassembly.
  2. 2. Repair Access & PreparationRemove or protect applicable components where authorised and prepare the affected area for the selected repair procedure.
  3. 3. Body Repair & Surface RestorationUndertake the approved dent, metal, corrosion, surface-preparation or refinishing work according to the condition identified.
  4. 4. Reassembly & Dimensional ReviewReinstall applicable components and review visible alignment, operation and surface presentation before handover.
Vehicle Styling & Customisation

Vehicle Customisation & Component Integration

Customisation projects begin with the intended transformation, vehicle compatibility, component selection and the materials or parts authorised for the work.

  1. 1. Consultation & Compatibility AssessmentDefine the requested modification and inspect the vehicle areas affected by the intended work.
  2. 2. Component Selection & Fitment PlanningReview the selected components, preparation requirements and any associated work necessary before installation.
  3. 3. Controlled Installation or ModificationUndertake the authorised installation or modification while protecting adjoining vehicle surfaces and components.
  4. 4. Fitment, Function & Finish VerificationInspect component fitment, relevant operation and final aesthetic presentation before vehicle handover.
Request a quotation